Simple Cleaning Tips For A Built-In Electric Oven
Cleaning a built-in electric oven is necessary to keep it working well and looking good. Regular cleaning stops grease and food buildup that affects cooking and causes smells.
These tips will guide you on how to keep your built-in electric oven clean without much effort.
Clean spills quickly:
Wipe up spills and splashes as soon as the oven cools down. This prevents food from hardening and becoming difficult to remove. Use a damp cloth or sponge with warm water for quick cleaning. Avoid harsh scrubbing which might damage the oven’s surface.
Use oven-safe cleaning products:
Choose cleaning products made for ovens. These are designed to remove grease and burnt food without harming the oven’s finish. Follow the instructions on the label for the best results. If you prefer natural options, a paste made from baking soda and water works well.
Remove and clean oven racks separately:
Take out the oven racks and clean them separately. Soak them in warm soapy water for a while to loosen dirt. Use a soft brush or cloth to scrub off grease and grime. Dry the racks completely before putting them back in the oven.
Avoid abrasive tools:
Avoid using steel wool or hard brushes inside the oven. These can scratch surfaces and damage the coating. Instead, use non-abrasive sponges or cloths. Gentle cleaning tools keep the oven in good condition for longer.
Use the self-cleaning function:
If your oven has a self-cleaning mode, use it following the manufacturer’s instructions. This function heats the oven to very high temperatures to burn away food residue. After the cycle, wipe away the ash with a damp cloth. Ensure the room is well ventilated during this process.
Clean the oven door:
The oven door, especially the glass, collects grease and fingerprints. Use a glass cleaner or a mixture of vinegar and water to clean it. Apply the cleaner with a soft cloth and wipe gently. Avoid spraying cleaner directly on the glass to prevent drips inside the door.
Keep the oven dry:
After cleaning, ensure to dry all parts well. Moisture left inside can cause rust or damage electrical components. Use a dry cloth to remove any water or cleaning solution.
